Type: Driver
File Name:
File Size: 6.5 MB
20 (4.39)
Downloads: 9
Supported systems: Windows 10, Windows 8.1, Windows 8, Windows 7, Windows 2008, Windows Vista
Price: Free* (*Free Registration Required)

Download Now

When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Open the socket: Step ASRock H61M-HVGS XFast USB the lever by depressing down and out on the hook to clear retention tab.

Rotate the load lever to fully open position at approximately degrees. Rotate the load plate to fully open position at approximately degrees. Step 2.

Download ASRock XFast USB Utility

It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. This cap must be placed if returning the motherboard for after service.

Step 3. Insert the Pin CPU: Hold the CPU by the edges where are marked with black lines. Locate Pin1 and the two orientation key notches.

Specification sheet (buy online): H61M-HVGS Asrock H61M-HVGS LGA Motherboard

Carefully place the CPU into the socket by using a purely vertical motion. Verify that the CPU is within the socket and properly mated to the orient keys. Step 4. Close the socket: Rotate the load plate onto the IHS. While pressing down lightly on load plate, engage the load lever.

ASRock H61M-HVS - motherboard - micro ATX - LGA1155 Socket - H61 Specs

Secure load lever with load plate tab under retention tab of load lever. Below is an example to illustrate the installation of the heatsink for Pin CPU. Step 1. Apply thermal interface ASRock H61M-HVGS XFast USB onto center of Step 2.

ASRock H61M-HVS - motherboard - micro ATX - LGA Socket - H61 Specs - CNET

Place the heatsink onto the socket. Ensure IHS on the socket surface. Align fasteners with the motherboard throughholes.

Rotate the fastener clockwise, then press down on fastener caps with thumb to install A Step 5. Step 6. Repeat with remaining fasteners.


If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Connect fan header with the CPU fan connector on the motherboard.

Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. Please be noticed that this motherboard supports Combo Cooler Option C. Otherwise, it will operate at single channel mode. If you install ASRock H61M-HVGS XFast USB one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology. It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips outward. PCIE slots: Installing an expansion card Step 1.

Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. Remove the system unit cover ASRock H61M-HVGS XFast USB your motherboard is already installed in a chassis.

Asus F81Se ModemTo start the download, select one of the servers and click "download"
Axis 2130 PTZGet In Touch
AJP D870PProduct Details
HP Mini 210-1099SE Notebook RalinkMotorola BluetoothMediaman Infotech Private Limited
AMT Fastmark 603 PAL 300 DPI thermalDriver Quick Links

Remove the bracket facing the slot that you intend to use. Keep the Step 4. Align the card connector with the slot and press firmly until the card is screws for later use. Step 5. Fasten the card to the chassis with screws.


Supports Intel HD Graphics with Built-in Visuals; Graphics Output Options: D-Sub, HDMI; Supports ASRock Xfast RAM, Xfast LAN, Xfast USB Technologies. Thank you for purchasing ASRock H61M-HVGS XFast USB H61M-HVGS / H61M-HVS motherboard, a reli-. ASRock XFast USB can boost USB storage device performance.


Other Drivers