ASROCK H61M-DGS R2.0 INTEL SMART CONNECT DRIVER DETAILS:
|File Size:||32.5 MB|
|Supported systems:||Windows 10, Windows 8.1, Windows 7|
|Price:||Free* (*Free Registration Required)|
ASROCK H61M-DGS R2.0 INTEL SMART CONNECT DRIVER
Please be noticed that this motherboard supports Combo Cooler Option C. Please adopt the type of heatsink and cooling fan compliant with Intel Pin CPU to dissipate heat.
Before you installed the heatsink, you need to spray thermal interface material between the CPU and the heatsink to improve heat dis- sipation. Ensure that the CPU and the heatsink are securely fastened and in good contact with each other.
For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink. Below is an example to illustrate the installation of the heatsink for Pin CPU. Apply thermal interface material onto center of IHS on the socket surface. Apply Thermal Interface Material Step 2. Place the heatsink onto the socket.
Fastener slots pointing straight out Step 3. Align fasteners with the motherboard through- holes.
Rotate the fastener clockwise, then press down on fastener caps with thumb to install and lock. Repeat with remaining fasteners. Press Down 4 Places If you press down the fasteners without rotating them clockwise, the heatsink cannot be secured on the motherboard. Connect fan header with the CPU fan connector on the motherboard.
Asrock H61M-DGS R2.0 Intel H61 LGA 1155 (Socket H2) microATX motherboard
Secure excess cable with tie-wrap to ensure cable does not interfere with fan operation or contact other components. Otherwise, it will operate at single channel mode. If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology.
It is not recommended to install them on this motherboard. Unlock a DIMM slot by pressing the retaining clips outward. Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power ASRock H61M-DGS R2.0 Intel Smart Connect is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
Asrock H61M-DGS R :: Pamatplates :: Komponentes :: Datoru komponentes, tīkla produkti ::
Remove the system unit cover if your motherboard is already installed in a chassis. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.
- ASROCK H61M-DGS R
- Drivers and utilites for ASRock motherboards - choice of model.
- Asrock H61M-DGS [Solved] - Drivers - Apps General Discussion
- Drivers and utilities for motherboards ASRock:
- 211,305 results
- To search drivers or utilities, select the motherboard model:
- Asrock H61M-DGS R2.0
Align the card connector with the slot and press irmly until the card is completely seated on the slot. Fasten the card to the chassis with screws.
Asrock H61M-DGS R2.0
Replace the system cover. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply.
|Acer Aspire 4810TZ-4508||Още подобни стоки от най-популярните|
|Gigabyte GA-X170-WS ECC ASMedia SATA||You are here|
|Daytek DT-1536A||Shop by category|
Please be noted that the password, date, time and user default proile will be cleared only if the CMOS battery is removed. If you clear the CMOS, the case open may be detected. H61M-DGS R Supports 3rd and 2nd generation Intel® H61 - Supports Intel® Rapid Start Technology and Smart Connect Technology.
*Intel® Rapid Start. Specifications: CPU: Supports 3rd and 2nd generation Intel Core i7 / i5 / i3 / Xeon / Pentium / Celeron in LGA package - Supports Intel Turbo Boost