AIRLIVE WL-8000AP DRIVER DETAILS:
|File Size:||38.3 MB|
|Supported systems:||Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X|
|Price:||Free* (*Free Registration Required)|
AIRLIVE WL-8000AP DRIVER
This article looks at some of the basic concepts that are used when configuring AirLive WL-8000AP and reviews the configuration steps required to get NAT working.
Ovislink WLAP Manuals
In computer networks, a DMZ demilitarized zone is a physical or logical sub-network that separates an internal local area network LAN AirLive WL-8000AP other untrusted networks, usually the Internet. External-facing servers, resources and services are located in the DMZ so they are accessible from the Internet but the rest of the internal LAN remains unreachable.
- Ovislink default passwords :: Open Sez Me!
- AirLive WLAP manual
- OVISLINK WLAP USER MANUAL Pdf Download.
- AirLive WL-8000AP - router specifications.
Advanced setup and firmware upgrade can be done easily. AirLive WL-8000AP Panel: When power on self-test failure occurs.
Ovislink WL-8000AP User Manual
Green Turns solid green when connected and associated to at least a client station. LED Indicators Page: Rear Panel: Performing the Factory Reset will erase AirLive WL-8000AP previously entered device settings. Table 2: Connection Ports Page: Disabled IP Address Before your starting hardware connection, you are advised to find an appropriate location to place the Access Point.
|AMD Radeon R9 290||Related Reading|
|BENQ EW2420 D-SUB||Navigation menu|
|Acer Aspire S5-391 ELANTECH Touchpad||The AirLive WL-8000AP is a 108Mbps Wireless Access Point|
|Acer Aspire 9120 SMSC FIR||Related titles|
AirLive WL-8000AP Usually, the best place for the Access Point is at the center of your wireless network, AirLive WL-8000AP line of straight to all your wireless stations. Also, remember to adjust the antenna; usually the antenna is placed higher, the performance will be better.
Connect to your local area network: Connect an Ethernet cable to the Ethernet port of this Wireless Access Point, and the other end to a hub, switch, router, or another wireless access point. Power on the device: Check the LEDs: AirLive WL-8000AP your PC: Make sure your local PC s has wireless network adapter installed. Start your computer. Connect an Ethernet cable between your computer and the Wireless Access Point. Make sure your wired station is set to the same subnet as the Wireless Access Point, i.
Start your WEB browser. In the Address box, enter the following: The details for the configuration menu are described as follows. FW Version The current version of the firmware installed in this device. SW Version The current version AirLive WL-8000AP the software installed in this device.
It is case-sensitive and must not exceed 32 characters. It must be identical for all points in the network. Make sure that all points in the network are the same. Channel The number of channels supported depends on the region of AirLive WL-8000AP Access Point.
All stations communicating with the Access Point must use the same channel. Page 9: Before your starting hardware connection, you are advised to AirLive WL-8000AP an appropriate location to place the Access Point.
OvisLink AirLive WL-8000AP
Usually, the best place AirLive WL-8000AP the Access Point is at the center of your wireless network, with line of straight to all your wireless stations. Also, remember to adjust the antenna; Page b/g Access Point.
WLAP. User's Guide. Page 2. FCC Certifications. This equipment has been tested and found to comply with the limits for AirLive WL-8000AP Class. Default Password, Login and IP for your OvisLink AirLive WLAP router. User Manuals and How to Factory Reset your OvisLink AirLive WLAP router.